Task #6198
MNDeployment #3748: PPBIO Member Node
Task #6187: PPBIO: Testing
Task #6188: PPBIO: Registration in environment
Task #6197: PPBIO: Synchronization
PPBIO: Set up synchronization of the MN
100%
Description
Enable synchronization for the MN.
History
#1 Updated by Ben Leinfelder over 9 years ago
- Status changed from New to In Progress
Attempted to update sync flag, but their server is operating behind a proxy. David will see if INPA can allow their server direct communication with the CN and other MNs.
#2 Updated by Ben Leinfelder over 9 years ago
Hi David,
Minimally, your Member Node will need to communicate with the coordinating nodes. Typically, each environment has three different hosts that we route traffic to via round-robin DNS.
So here are the production and stage IPs that should allow traffic to over port 443:
$> dig +short cn-ucsb-1.dataone.org cn-unm-1.dataone.org cn-orc-1.dataone.org
128.111.54.80
64.106.40.6
160.36.13.150
$> dig +short cn-stage-ucsb-1.test.dataone.org cn-stage-unm-1.test.dataone.org cn-stage-orc-1.test.dataone.org
128.111.54.76
64.106.40.8
160.36.13.151
Hope that helps,
-ben
On Nov 3, 2014, at 7:34 AM, David Valentim Dias dvdscripter@gmail.com wrote:
Hi Ben,
INPA sysadmin is asking for a list of ip address/host and ports. Can you pass a list?
Thank you
#3 Updated by Laura Moyers about 8 years ago
- Status changed from In Progress to Closed
- % Done changed from 0 to 100
- translation missing: en.field_remaining_hours set to 0.0
